InputElectrical Characteristics(输入特性)
Input voltage range 输入电压 | 
 90Vac to 264Vac  | 
Normal voltage range标称输入  | 100Vac to 240Vac  | 
Frequency range 频率范围  | 50Hz/60Hz±5%  | 
Max input ac current 最大输入电流  | 10.0Amax at full load condition  | 
Inrush current (cold start) 浪涌电流  | 30Atyp peak, 120Vac;60Atyp peak, 220Vac  | 
Efficiency(full load) 效率  | 90% at 100Vac; 93.5% at 230Vac Typ.  | 
Leakage Current 泄漏电流  | Less Than 0.5mA, 240Vac input  | 
Power Factor 功率因数  | >0.98@115VAC; >0.96@230VAC Full load  | 
Input Fuse 输入保险  | T15.0AH/250Vac  | 
Output Voltage 输出电压  | Regulation 调整率  | Min. current 最小电流  | Rated current 额定电流  | Peak current 峰值电流  | 
36V  | ±1%  | 0.1A  | 22.5A  | 25.0A  | 
纹波和噪声测试:纹波和噪音带宽设置在20兆赫兹。
输出端并联一个0.1uF的陶瓷电容和一个47uF的电解电容来测试纹波和噪声。
Power safety reference the followingstandards
电源安全性参考下列标准:
1) *UL60950/UL60065
2) *EN60950/EN60065
Power electromagneticinterference reference the following standards:
电源电磁干扰参考下列标准:
1) Conduction Emission : (传导干扰度)
*EN55032, CLASS A
2) RadiatedEmission : (辐射干扰度)
*EN55032, CLASS A
Note:The powerboard should be assembled in customer product to test for passing the abovecriterion.需配合用户电路整机通过上述标准。
The powersupply EMI is referenced to the following standards
电源电磁抗扰参考下列标准:
1) ESD (静电抗扰度)
*GB17626.2-1998/IEC61000-4-2 Lever 1
2) EFT (脉冲群抗扰度)
*GB17626.4-1998/IEC61000-4-4 Lever 1
3)DIP (电压跌落)
*GB17626.11-1998/IEC61000-4-11 Class B/C
* Operating工作温度: -10℃ to +50℃.
* Storage存储温度: -20℃ to +80℃.
* Ventilationcooling(230V) . 4x4 风扇强制冷却
*170mm X 82mm X 46.5mm(元件面高)(长L*宽W* 高H).
*约710g



